Experimental · Cura advanced settings 2018 #11

This is the last episode of the Cura Custom Settings series, where we are going to analyse the eleventh tab of the custom settings menu in Ultimaker Cura 3.4.1, that is the Experimental tab.

You can support us on Patreon here

And Subscribe to our YouTube Channel here


We’re going to have a light overview of the coolest features of this tab in cura, that is the Experimental tab. This menu is a very dense and complete tab, with lots and lots of cool sub-options to play with, and that’s why I’m going to start a complete dedicated new series to this tab in the next weeks, and will be called Cura Experimental Settings 2018.

Along the video we will watch the most relevant options and the basics of each of them, that are: Tree support, top surface skin, infill travel optimization, slicing tolerance, auto temperature, maximum resolution, draft shield, support chunk, enable coasting, spaghetti infill, conical support, fuzzy skin and wire printing.

Playing with this settings will allow you to create really cool and innovative solutions, but as I said before, we will analyse all of them in our new series!.

You can DOWNLOAD the Ahri STL Pack from League of Legends announced in the video from clicking here.

Experimental Ahri STL League of Legends

Ahri STL League of Legends






Cura advanced settings 2018

This series is going to have 11 episodes, one dedicated for each of the Tabs in the Custom Print Settings menu in Cura 3.4. You can find the list of episodes here:

In the next weeks I’m going to start a whole new series dedicated to the Experimental tab in the custom settings menu in Ultimaker Cura. So subscribe to the channel and activate the bell to be notified when the next video is uploaded.

About Ultimaker Cura 3.4.1.

Cura is one of the most common slicer software that are mostly used for 3D Printing. It supports a huge variety of 3d printers such as the BQ Hephestos, Original Prusa i3 MK2, Ultimaker 2, Ultimaker 3, Rostock, etc.

It allows us to print in 3d in three different ways:
The first is by uploading the .gcode files into an SD Card, that we will insert in our 3D Printer. Second, we can connect our 3D Printer to our computer via USB, and control it directly from our Cura software, and finally, there is an option to control some 3D Printers at the same time remotely, via internet.

Ultimaker Cura in the version 3.4,1 or the most recent version depending when you watch this video, is available both for Mac OS and Windows operating systems.

You can find the links to download Ultimaker Cura 3.4.1 here:

You should also watch our guides to download different very powerful 3d modelling software for free:

I hope you guys enjoyed with this video and subscribe to our YouTube Channel, and give a lot of likes to the videos motivating me to keep producing my content!

If you want to follow us on social media to stay tuned when new content is uploaded, you can do it through the next icons:

Last but not least I would like to propose you to become a Patron. Doing that, you would make me super happy and you will also help me to keep bringing good content to the channel.

Furthermore your name will appear at the end of all the videos, and much more rewards such as early access to the videos, access to the files, get our maker coin and more cool stuff that you can find in our Patreon page!

And of course, a special thanks to Hayder Jawad,  Andrei Ignat and Gennaro Tortone for being my loyal supporters on Patreon!

Finally, as always:

-See you, in the next, video!!
M4730X - Architects3DP

Leave a Reply

Your email address will not be published. Required fields are marked *